TRANSITION NETWORKS, INC. 10/100 Link Protector(1)10/100btx-(2)10/100btx

Redcorp# 78523609 Article# SBFTF1010-130-NA
€ 548.24 Excl. VAT
Starts from € 536.91 Details
Quantity
-
1
+
10/100 TRANSITION NETWORKS, INC. 10/100 Link Protector(1)10/100btx-(2)10/100btx
For personal help or faster delivery

+32 2 558 30 00

The Redundant Link Protector is a 10/100 Ethernet fault-tolerant transceiver. It significantly reduces network downtime, adding a new level of redundancy to 10/100 Ethernet connections. It also provides a redundant path for critical 10/100 devices. In a 10/100 Ethernet network, a critical device such as a file server may be connected to the rest of the network through a hub or a switch. A common problem in this configuration is that the server is often connected to the network through a single cable. If the cable fails, then the server is disconnected from the rest of the network. Similarly, if a port of a hub or switch to which the server is connected fails, the server is disconnected from the network.

The Redundant Transceiver has three ports: one for the critical (main) device, one for the default (primary) path for the critical device, and another (backup) for the backup path. It is a smart device that will not send any signal on a path that is not active. If the primary path loses its link, then the transceiver will immediately (in less than one microsecond) switch to the backup path.
When the primary path re-establishes its link, the Redundant Link Protector will automatically switch back to the primary path.

Specs

  • Fault-tolerant redundant connections
  • Easy to install and use
  • Supports half and full-duplex transmission
  • AutoCross (on all 3 ports)
  • Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration.
  • Auto-Negotiation (802.3u)
  • Allows devices to perform automatic configuration to achieve the best possible mode of operation over a link.
  • IEEE 802.3 compliant
  • Nine diagnostic LEDs
  • Optional 3-port switch mode

Standards IEEE Std. 802.3
RJ-45 Connectors Type: 8-position, RJ-45 receptacle:
1: TX+
2: TX-
3: RX+
4: NC (no connection)
5: NC (no connection)
6: RX-
7: NC (no connection)
8: NC (no connection)
Dip Switches SW1: Auto-Negotiation Enable/Disable
SW2: 10/100Mbps
SW3: Full/Half Duplex
SW4: Redundancy/Switch
System LEDs Power (PWR): Indicates the presence of POWER
Primary (PRI): Indicates a link is established on the Primary port
Backup (BKP): Indicates the link has moved over to the Backup port
Per Port LEDs Lower Right:
Green indicates 100Mbps;
Orange indicates 10Mbps;
Flashing indicates Activity

Lower Left:
Green indicates full-duplex; Off half-duplex
Dimensions Width: 3.25" [82 mm]
Depth: 4.8" [122 mm]
Height: 1.0" [25 mm]
Power Domestic:
Input: 120 VAC @ 60 Hz.
Output: 12 VDC, 0.5 Amp

International: Input: 100 - 240 VAC @ 50 Hz.
Output: 12 VDC, 1.25 Amp
Operating Temperature 0 - 50°C [32°F - 122°F]
Storage Temperature -15°C - 65°C [-5°F - 149°F]
Relative Humidity 5% - 95%
Altitude 0 - 10,000 ft.
Shipping Weight 2 lbs. [0.90 kg]
Safety Compliance Wall Mount Power Supply: UL Listed & CSA Certified
Regulatory Compliance FCC Class A, EN55024, UL 60950, CE Mark


Results

Similar Products