TRENDNET Ide Device To SATA Converter

• Connect any IDE CD, DVD or hard drive device to an available Serial ATA port
• Use your current IDE device on new SATA motherboards
• Utilizes Serial ATA 1.0 and hot-pluggable technology
• Master/slave hard drive emulation supported
• Supports PIO mode 0~4 and Ultra DMA mode 0~7
• Supports ATAPI Packet command set, and 48-bit LBA addressing
• Supports additional ATA commands for serial ATA SCR access
• Power save mode built-in
• Serial ATA Built In Self Test (BIST) ready

Hardware

• Standard : ATA 33/66/100/133, SATA 1.0
• Supported OS : Any OS that supports ATA and SATA
• Input
  • 7-pin female SATA data connector
  • 4-pin power connector
• Output : 40-pin IDE female connector to IDE device
• Cables
  • 1x SATA cable
  • 1 x Y power cable
• Power Consumption : 78 mA
• Dimension : 57 x 35 x 12mm (2.3 x 1.4 x 0.4 in.)
• Weight
  • Main: 15g (0.6oz.)
  • With wires: 40g (1.4oz.)
• Temperature : -20ºC to 60ºC (-4ºF to 140ºF)
• Humidity : 0~90%, Non-Condensing
• Certification : FCC, CE